Our advice: arrange it before 1 December. 14 days left. Get started for 2026
What do you need to sign up?
Have this ready before you start and you get through the sign-up in one go. What you finish is saved.
Contents
Whose name is the energy contract in?
That decides how you sign up. The name on the energy bill must match whoever signs up.
Is the contract in your partner's or housemate's name? Then that person signs up, with their own name and ID.
What to have ready as an individual
A recent energy bill
An invoice, instalment bill or annual statement from your current energy supplier. A PDF of at most 10 MB, no older than 12 months, showing your name, your address and your EAN code.
The name on the bill decides who may sign up. From the bill we also read your EAN code and grid operator, so you do not have to type them.
A bank statement, screenshot or usage overview is not an energy bill.
Where is the EAN code on your bill?The last 6 digits of your meter code
The meter code is on your electricity meter in the meter cupboard, and often on your energy bill too. The full code starts with an E.
We check that the meter belongs to your EAN code.
Your ID and your phone
A passport, ID card or driving licence. You take a photo of it, and a selfie. It takes about 2 minutes.
You sign the agreement online, so we need to be sure it is you. Our partner Stripe runs the check; Your photos are stored at Stripe, not at Voltico.
Enter your name as it is on your ID: Petrus if that is what your passport says, even if everyone calls you Peter.
The login details for your charger
For the app or platform of your charger.
With them you connect your charging sessions, so we can register them with the NEa.
Your IBAN
That is where we pay out your earnings.
What to have ready as a business
A recent energy bill for each location
An invoice, instalment bill or annual statement as a PDF of at most 10 MB, showing the company name, the address and the EAN code. For a small-consumption connection at most 12 months old, for a large-consumption connection at most 2 months.
The name on the bill must be the organisation you sign up with, as registered with the Chamber of Commerce (KvK). For a sole proprietorship it may be the owner's name.
Each location has its own bill and EAN code. Ask accounts, facilities or the landlord for them in advance: after step 3 you can no longer add locations.
Where is the EAN code on your bill?For large consumption, the grid operator invoice too
The invoice from your grid operator, as a PDF no older than 2 months.
The portal asks for it after you upload the energy bill, if the location has a large-consumption connection.
Large consumption is mostly found with fast chargers and larger business sites. Not sure? Have it ready anyway.
Who signs on behalf of the company
That person's name and email address. We take the people authorised to sign from the KvK register.
That person does the identity check and signs the agreement.
Is someone other than you signing? Let that person know in advance.
Who signs for your company?KvK number and a short description
We fill in the company details from the KvK. The description of your activities is 50 to 250 characters.
Access to your charging platform
The login details of the system that manages your charge points, for example E-Flux.
With them you connect the charging sessions.
Does your platform say Coming soon? Finish your sign-up anyway. We email you as soon as you can connect.
IBAN, invoice address and VAT number
The IBAN is in the name of the same organisation you sign up with. Plus the invoice address and the email address for invoices.
Only with your own solar generation on a large-consumption connection
The metering company, the electrical diagram of the installation and any subsidy details.
Does a colleague have the bill?
Send this message. You send it yourself; we store nothing.
To the person who has the energy bills
Energy bills needed for our Voltico sign-up
Hi, We are signing our charge points up with Voltico. Voltico is a software platform that helps companies monetise their charging data. It connects to our charging platform, validates the kWh charged, registers them as EREs (emission reduction units) with the Dutch Emissions Authority (NEa), handles the sale and pays the revenue out to us. Voltico is registered with the NEa for this. There are no upfront costs. For the sign-up I need the energy bill for each charging location: - the full bill as a PDF (the EAN code is sometimes on a later page) - showing our company name, the address and the EAN code of the electricity connection - no older than 12 months, or 2 months for a large-consumption connection - for large consumption also the grid operator invoice, no older than 2 months An invoice, instalment bill or annual statement is fine; a bank statement or usage overview is not. Where the EAN code is on our supplier's bill: https://voltico.nl/en/help-center/where-is-my-ean Everything we need for the sign-up: https://voltico.nl/en/help-center/what-do-i-need?type=business Thanks in advance!
Who signs on behalf of your company?
Someone who, according to the Chamber of Commerce (KvK), may sign on behalf of the company. In step 1 we take the authorised signatories from the KvK and you choose one. That does not have to be you.
You sign yourself
Choose yourself. You then have seven steps and do the identity check and the signing in your own overview.
A colleague or director signs
Choose that person and enter their email address. After step 3 they get an email from Voltico with a personal link. Send the message below beforehand.
The right person is not listed
Click ‘Not the right signatories? Enter them yourself.’ Enter the name as on the ID, and the email address.
Check the signatory before you send in step 3. After that only support can change it.
Not sure who may sign, for example for a homeowners' association or a company with several directors? Check your KvK extract, or email support@voltico.nl.
To the person who signs
You will get an email from Voltico to sign our agreement
Hi, I have signed our company up with Voltico and named you as the signatory, because according to the KvK you may sign on our behalf. What is Voltico? Voltico is a software platform that helps companies monetise their charging data. It connects to our charging platform, validates the kWh charged, registers them as EREs (emission reduction units) with the Dutch Emissions Authority (NEa), handles the sale and pays the revenue out to us. Voltico is registered with the NEa for this. There are no upfront costs. What you are asked to do: 1. You get an email from Voltico with a personal link. At the top of the page are our company name, your name and your email address. 2. You confirm your identity through Stripe, in about 2 minutes. Have your passport, ID card or driving licence and your phone to hand. Your photos and ID are stored at Stripe, not at Voltico; Voltico uses the outcome. 3. Straight after that you read and sign the agreement. You can download it and the terms first. Then you are done; I will finish the rest of the sign-up. Explanation for the signatory: https://voltico.nl/en/help-center/signatory How it works, from connecting to payout: https://voltico.nl/en/how-it-works
How your sign-up goes, in six steps
You do it in the portal. A step opens once the steps before it are done.
- Step 1
Tell us about you
Your name as on your ID, your address and your phone number.
- Step 2
Add your charging location
Upload your energy bill, check the EAN code and enter the last 6 digits of your meter code.
Where is the EAN code on your bill? - Step 3
Verify your identity
A check of about 2 minutes with Stripe, using your ID and a selfie.
- Step 4
Sign the agreement
Your details are already in it. You can download the agreement and the terms first.
- Step 5
Connect your charging sessions
Log in to the app or platform of your charger.
- Step 6
Set up your payout
Your IBAN and the VAT question. The last click sends your sign-up.
After that we check your sign-up and email you the outcome. If something is not right, we tell you what. From then on your charging sessions come in by themselves.
How your company's sign-up goes, in eight steps
You do it in the portal. A step opens once the steps before it are done.
- Step 1 · Applicant
Tell us about your business
The company details come from the KvK. This is also where you choose who signs.
Who signs for your company? - Step 2 · Applicant
Add your charging locations
For each location the energy bill, and for large consumption the grid operator invoice. Add every location.
Where is the EAN code on your bill? - Step 3 · Applicant
Review the agreement
Check everything, the signatory included, and send. After that steps 1 and 2 are fixed.
- Step 4 · Signatory
Verify identity
Through the personal link in the email from Voltico. About 2 minutes.
What the signatory gets - Step 5 · Signatory
Sign the agreement
Straight after the check, on the same page. You get an email as soon as it is done.
- Step 6 · Applicant, only with own solar on large consumption
Tell us more about your installation
Metering company, electrical diagram and subsidy. If it does not apply, you skip this step.
- Step 7 · Applicant
Connect your charging sessions
Connect the platforms or brands of your charge points.
- Step 8 · Applicant
Set up your payout
IBAN, invoice address and VAT. Your sign-up then goes to our team for review.
Do you sign yourself? Then it is seven steps: step 3 drops out and you do the identity check and the signing in your own overview.
After that we check your sign-up and email you the outcome. If something is not right, we tell you what. From then on your charging sessions come in by themselves.